FINDING YOUR FLYING ADDRESS
1. Run CE
2. Target your bin file
3. Scan your character name using Value: Text
Eg. ABCDEFG (case sensitive)
4. after that u will end up with 5 or 6 addresses
5. right click each address and use Browse this Memory Region
6. Find bold with position like this.

XX XX XX XX XX XX YY XX XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
XX XX XX XX XX E9 XXXX XX XX XX XX XX XX XX XX
Note: YY address that keep changing everytime u log in

7. choose each of them and right click to add those addresses using 2 byte
8. Name E9 address as FLY or something else
9. Name YY as ALTITUDE
10. When you'r done....FLY will be shown as 233 (default setting)
11. ALTITUDE will be shown as random number 15000-17000 or others that's shown your current altitude.

HOW TO FLY
1. Freeze FLY and change the value from 233 to 201
2. Freeze ALTITUDE and (increase) add + value (80-100) from your current altitude
Eg. Current ALTITUDE 17555....change it to 17655 (1755+100=17655)

HOW TO GO UNDERGROUND
1. The same as FLYing just change your altitude to (decrease) -
Eg. Current ALTITUDE 17555....change it to 17455 (17555-100=17455)

HOW TO GO BACK ON THE GROUND
1. Unfreeze all (FLY and ALTITUDE)
2. Change the value of FLY from 201 to 233

NOTE: No matter go FLY or UNDERGROUND...othe rpeople will see you as walking on the ground

YOU SHOULD DO TRIAL AND ERROR TO TEST YOUR ALTITUDE AGAINST THE MOB THAT YOU'R TRYING TO ATTACK.
1. Increase ALTITUDE to +80 or +100 or until the yellow dot dissapear (not to far or you wont be able to hit the mob)
2. If the mob got HIT, you see the PT increase and the EXP increase...it means you'r CORRECT.
3. If you still got HIT by the mob, then run away using Keyboard mode and slightly increase your altitude by +5
4. Do STEP 3 until the mob wont HIT you anymore.

NOTE: Do Not move from your current location if the Land Texture is not FLAT