• Attack Speed

1. Activate skill that increases Elem/Attr Damage and Attack Speed by 5-10% (depending on skill level/mastery) But for now we MUST use the Level/Skill Mastery 1 version.
2. Search 5 [4 Bytes]
3. Unequip weapon
4. Search 0 [4 Bytes]
5. Activate same Buff
6. Search 5 [4 Bytes]
7. Test each address by changing each one to a high number and freezing
8. Freeze and change to whatever Value you want once you find the right one.

• Movement Speed

1. Activate skill that increases Dodge Rate and Movement Speed by 5-20% (depending on skill level/mastery) But for now we MUST use the Level/Skill Mastery 1 version.
2. Search 5 [4 Bytes]
3. Unequip weapon
4. Search 0 [4 Bytes]
5. Activate same Buff
6. Search 5 [4 Bytes]
7. Test each address by changing each one to a high number
8. Change to whatever Value you want once you find the right one.

• Current HP/Health

1. Search your Current HP/Health [4 Bytes]
2. Lose HP/Health
3. Search new Current HP/Health
4. Find the ONE Current HP/Health address and use for/with Bots/Trainers

• Max HP/Health

1. Search your Max HP/Health [4 Bytes]
2. Remove your Body Armor
3. Search new Max HP/Health
4. Find the ONE Max HP/Health address and use for/with Bots/Trainers

• Current MP/Spirit

1. Search your Current MP/Spirit [4 Bytes]
2. Use a Skill/Martial Art Technique
3. Search new Current MP/Spirit
4. Find the ONE Current MP/Spirit address and use for/with Bots/Trainers

• Max MP/Spirit

1. Search your Max MP/Spirit [4 Bytes]
2. Remove your Amulet/Necklace
3. Search new Max MP/Spirit
4. Find the ONE Max MP/Spirit address and use for/with Bots/Trainers

• Zoom

1. Zoom all the way in
2. Search Unknown initial value [4 Bytes]
3. Zoom out 1 time
4. Search Increased value [4 Bytes]
5. Continue pattern of Zoom out 1 time -> Search Increased value [4 Bytes] -> REPEAT until 400-600 addresses
6. Zoom in
7. Search Decreased value [4 Bytes]
8. Zoom out
9. Search Increased value [4 Bytes]
10. Look for the Green addresses that has a value between 15000 - 18000
11. Test by zooming out 1 time and seeing if the value changes a little

• Animation

1. Search Unknown initial value [4 Bytes]
2. Press [SPACEBAR] ingame.
3. Search Changed value [4 Bytes]
4. Search Unchanged value [4 Bytes]
5. Continue pattern of [SPACEBAR] -> Changed value -> Unchanged value -> REPEAT until 300-500 addresses
6. Move all Green addresses to CheatTable
7. Test by freezing HALF the list, then press the [SPACEBAR] ingame to see if it freezes the animation or not.
8. Continue freezing HALF the list until you find the address that freezes your animation

    * Zoom

    To find the Zoom Address you need to start with zooming ingame ALL THE WAY IN. Once you did, Alt+Tab or switch back to CheatEngine. Then in the middle of the window, it should say Value:. Right under it is a box, then under that box it says Exact Value. Under that it should say 4 Bytes. Click the Exact Value box and then click Unknown initial value. Once all of these are correct, click [First Scan] (above Value:).

    Once this finishes, you'll notice on the left that there are NO addresses, but instead it says, above, Found: followed by a very high number. Now, go back into the game by Alt+Tab or switching to it. Then zoom out ONCE. You can do this by using the scroll wheel and spin it backwards ONCE. Then, go back to CheatEngine and then click the Exact Value box, then click Increased value. Then click [Next Scan], which is right next to [First Scan]

    Now, you should begin to start seeing addresses appear on the left of CheatEngine. Now, go back ingame and zoom out ONCE, again. Then, go back into CheatEngine and click [Next Scan]. This will scan for Increased value again.

    Continue this pattern of :

    Zoom out ONCE(ingame) -> [Next Scan] for Increased value(CheatEngine) -> REPEAT

    Until you reach about 400-600 addresses. Once you do, go back ingame and zoom IN ONCE. Then, go back into CheatEngine and search Decreased value this time. After, go back ingame and zoom OUT ONCE. Then, go back into CheatEngine and search for Increased value.

    Once you do, the address you're looking for is one of the Green addresses near the top of the list. Look for the Green address that has a value between 15000 - 18000. This will be the zoom address. Once you find it, click it and press the Red Arrow at the bottom-right of the address list. The address should have moved to the bottom box.

    Now to test if it is the right one, remember the value, then go ingame, zoom in or out, then go back into CheatEngine and see if the value increased if you zoomed out or decreased if you zoomed in. Once you find if it's right...CONGRATULATIONS! You have now found the Zoom address. This address is Client-Sided, which means only you can see the effects of the address. Have fun!

    Suggested Values:
    - [You can increase the initial value by any amount you want. I suggest changing in intervals of 100. You can only zoom IN if not frozen, but if frozen, then it won't move at all]
    - 1 [This will make the camera static, meaning that it will not move from where it is right now, unless you zoom back OUT]

    Tips:
    - DO NOT make the value TOO HIGH. This sometimes causes a the game client to FREEZE. This is why I said I suggest changing the value in intervals of 100, just incase if you accidentally make the value too high.
    - This is particularly useful for the detection of other players in the vicinity of your area, and you can turn off your hacks if there are, to prevent being reported.
    - This is also useful for finding bosses or any other NPC, because you have a wider FOV(field of view)

    "How can I reset animations and even revive in the exact same place after dying?"

    * Animation

    To find the Animation Address all you need to do ingame is stand there. Now, Alt+Tab or switch back to CheatEngine. Then in the middle of the window, it should say Value:. Right under it is a box, then under that box it says Exact Value. Under that it should say 4 Bytes. Click the Exact Value box and then click Unknown initial value. Once all of these are correct, click [First Scan] (above Value:)

    Once this finishes, you'll notice on the left that there are NO addresses, but instead it says, above, Found: followed by a very high number. Now, go back into the game by Alt+Tab or switching to it. Then, press the [SPACEBAR]. This should either lower or raise your weapon. This is what we want. You could sit, but it would take longer. Now, go back to CheatEngine and then click the Exact Value box, then click Changed value. Then click [Next Scan], which is right next to [First Scan]

    Now, you should begin to start seeing addresses appear on the left of CheatEngine. Now, click the Exact Value box again and then click Unchanged value, followed by [Next Scan]. Once you do this, go back ingame and press the [SPACEBAR]. Go back to CheatEngine and [Next Scan] for Changed value. Then [Next Scan] for Unchanged value.

    Continue this pattern of :

    [SPACEBAR](ingame) -> [Next Scan] for Changed value(CheatEngine) -> [Next Scan] for Unchanged value(CheatEngine) -> REPEAT

    Until you reach about 300-500 addresses. Once you do, the address you're looking for is one of the Green addresses near the top of the list. I suggest highlighting all of them by clicking on the very first green address then hold the [SHIFT] key and click the last green address. This will select all the eligible addresses. After selecting, click on the Red Arrow at the bottom-right of the address list. All of the addresses should have moved to the bottom box.

    Once you have your collection of addresses, try to remember the first 3-5 numbers of each address. If this is too hard or there are just too many addresses then remember the first 3-5 numbers of the first 3 addresses. Once you've done this, go back ingame and press the [SPACEBAR]. Now, go back to CheatEngine and look if any of addresses have had a drastic change in numbers, meaning if nearly all the numbers changed. We are looking for the address that changes nearly all of its numbers when the Animation ingame changes and is usually 8 digits long. The other incorrect addresses will only have the end numbers changing, most of the time.

    So continue to monitor any drastic changes in numbers for the addresses. Then just delete the addresses that don't change very much or only the end numbers change. Once you are down to about 15 or less addresses, then you can just Freeze HALF of the addresses. You can freeze an address by clicking this on the left of the addresses. Then, go back ingame and press the [SPACEBAR]. If this either lowers or raises your weapon successfully, then you can go back into CheatEngine and delete all of those addresses that you just froze. BUT, if you pressed the [SPACEBAR] and you failed to lower or raise your weapon and your character only flinches, then one of the addresses you froze will be the Animation address and you can delete the other unfrozen addresses. For both cases, you must go back to CheatEngine and, again, freeze HALF of the addresses and then test them by pressing the [SPACEBAR] ingame.

    Once you are down to one address...CONGRATULATIONS! You have now found the Animation address. This address is Client-Sided, which means only you can see the effects of the address, but are not actually affecting your real ingame Animations. This is mainly used for reviving in the exact same place after dying or resetting an Animation. Have fun!

    Suggested Values:
    - 1 [This will revive you if dead on the ground. This also resets any animation you are currently doing. Freezing this value will only cause you to continually perform the resurrection animation which may sometimes lead to disconnecting]

    Tips:
    - If you are dead on the ground and change the Animation address to 1 you will then stand up with 0 Hp/Health. In this state, you can talk, trade, etc. with any NPC or player, however you cannot attack, be attacked, or are detected by aggressive monsters. In order to completely revive normally, just Heal and you will return back to normal.
    - A side effect of Reviving is sometimes Invisibility. Everyone else will see you dead on the ground, however you will be able to walk around invisible, but you can still take damage by AoE damage and still be detected by aggressive monsters.
    - You can Reset an animation by changing the Animation address to 1 which then returns you to the normal standing animation, however everyone else will see you still doing the same animation as before you changed the address to 1. For example, you could sit down, then change the address to 1, and you will see yourself standing, but everyone else will see you sitting. If you make any movement that changes your animation(un/sheathing weapon, using skill, sitting back down, etc.) once your standing, then everyone will still see instantly stop sitting and doing whatever you just did. It looks very suspicious, so be careful when using this around other people.
    - If you are ever Stunned, using the reset animation will reset you to being able to heal and attack again, however you will not be unstunned and will not move on other people's screen.